In 1995, Grapevine, Texas-based Network Thermostat (NetX) began designing and manufacturing cost-effective electronic and software products to meet the needs for on-site and remote-location control for the heating, ventilation, and air conditioning (HVAC) market.
CloudConnect is the Dashboard Overview. Available to the PLUS and ADVANCED subscription plans, the Dashboard Overview presents a quick snapshot of important thermostat parameters offering the following:
If your Nest products have a reliable internet connection, they should update their software automatically. Keep in mind that we gradually push updates to Nest products in batches, so your product might not get updated immediately. You can also set your phone to automatically install the latest version of the Nest app and the Google Home app.
Note: You can also see some of the same information in the nest app by tapping your thermostat on the app home screen, then selecting Settings Technical Info.
There are a few different sections with information about your Nest thermostat's sensors, your Wi-Fi network, your thermostat's serial and model numbers and much more. Below is a list of what you'll see on your thermostat.
Troubleshooting: If the wires listed here don't match what wires are actually in the thermostat connectors, check that the wires are fully inserted and that the connector button stays down. Also check that there isn't anything (such as a broken wire end) jamming any of the connectors.
Ecobee's SmartThermostat supports Apple's smart home platform HomeKit and also gained support for \"Hey Siri\" voice control last year. The thermostat is regularly priced at $249.99 in the United States, but it is currently on sale for $199.99.
Google also says it will introduce a new smart home directory to help customers find Google Assistant-compatible products. This hub will enable customers to filter products based on compatible software and protocols.
The UP32H-IP thermostat includes humidification and dehumdifications control and the industry's most advanced Remote Sensor Bus with 6 remote sensor types and up to 11 total remote sensors, 2 digital inputs and an occupancy sensor input.
Proudly Made in the USA. The UP32H-IP thermostat is programmable communicating thermostat with connectivity as a Ethernet thermostat utilizing 10/100Mbps technology. In conventional mode, the unit can control up to two (2) stages of air conditioning and up to two (2) stages of heating. In heat pump mode, the thermostat can control up to two (2) stages of air conditioning and up to three (3) stages of heat, including auxiliary heat and emergency heat, with electric or gas (dual fuel). Humidity control is integrated for all equipment types. Integrated weather reporting gives full 7-day forecasting and heat pump balance point control without the need for an outdoor sensor.
This thermostat is an advanced version of the RP32H-IP thermostat. With the UP32H-IP, up to 11 total remote sensors of 6 different types can be wired to the thermostat's remote sensor bus, allowing sensing and monitoring of remote room temperature (up to 6 indoor sensors), outdoor, humidity, and up to 3 auxiliary sensors for supply air, return air, spare temperature (think walk in freezer or server room), and occupancy. Because the UP32H-IP works with either the on-board humidity sensor or the remote NT-HUM humidity sensor, it's possible to monitor and control humidity in a remote location. Perfect for securing the thermostat in an enclosure and still controlling temperature and humidity in the space. The unit will work for the vast majority of the HVAC units in the marketplace.
* Comfort Sync A3 is compatible with Armstrong Air HVAC products and requires separate purchase of Amazon Echo or Echo Dot. As of the date of this publication, Amazon Echo devices are not available for purchase in all countries. This reference is intended for use with US-based thermostats only. Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
NOTE:Nest Thermostat needs to have the following Cool (Y1) / Heat (W1) wires plugged into, without any real HVAC equipment connected to the thermostat.
Aprilaire communicating thermostats offer another excellent option for connecting your thermostat to your XTension system. Xtension build 828 adds the plugin for this thermostat which is available as part of the thermostat control plugin pack.
There seems to be only vague standardization as to what those are for, make sure to preserve any wiring from your old system and properly setup the new thermostat for the type and brand of system you have. Especially in mutli-stage systems these can be moved around. 153554b96e